Projects

Remove all debris and fibreglass prior to installation Timber baton steel roof structure for fixing foil by stapling Install 80sqm of SF19+ Fix to timber wall plate staples and mastic to seal, lap and tape all joints etc. Finished job with base roll to hide a ridiculous amount of wiring and pip work as per […]

Remove open cell foam, applied to breathable membrane Supply and fit SF19+ to 50 SQM in 2 small loft areas that were fully boarded

Full renovation and clean up. Remove all debris and dispose of. Fully board and install loft ladder hatch combination Supply and fit 50sqm of SF19+ Loft hatch was the first job as access was limited. Rubbish all removed and boards fixed to joists. Foil fixed under rafters and sealed to the floor over wall plate […]

Move a few stored items to the middle of the loft. Apply anti-fungal treatment. Install Multi-Foil (SuperFOIL SF19+).

Wood treatment + Foil Total m² to Foil (L × W × 1.5): 50

Insulation of a single leaf exterior wall to regulation u value. Kitchen with window.

The customer wanted to turn a small extension into a usable space it is a 100mm skin single storey building attached to the rear of the property after discussions with the customer i convinced her the best way was with super foil installation i liaised with super foil for the best build up and spec […]

Went to visit client to find a dorma roof with one half of roof needing insulating along with the internal stud walls

Customer wanted "above rafter superfoil" as their existing felt was plastic and there were gaps between each course. Customer also wanted roof tiles off and moss cleaned off and replaced and leaks fixed around chimney breast.

INSTALLATION OF SUPERFOIL SF19+